Micro Inverter

Easy to Install and simple to operate, the Series 5 Micro Inverters  are hybrid drives with digital drives with an analog interface that do not require programming or commissioning.  Setup is simple with a few potentiometer settings to get the motor running. The compact size and low cost make them ideal for many applications.   The chassis mount IP20 drives are excellent for OEM applications where digital programming and displays are not required.  The Series 5 mini-inverter includes many of the same protection features found in larger controls. Built-in current limit provides motor overload protection. High peak-current is available for up to 2 minutes and delivers up to 200% starting torque. The available peak currents will result in reduced nuisance tripping during overload conditions. Electronic inrush current limit and filtering is standard to reduce transient voltage spikes from dirty power sources.  The 8kHz PWM carrier frequency provides quiet motor operation.  Mounting dimensions are the same as the BC100 series DC controls to make upgrading to an AC drive simpler. 



·         0.5 Hp thru 5 Hp in IP20, NEMA 1, or NEMA 4X package

·         Single phase & three phase input in 115V, 208-230V, & 460V; 230V and 460V output

·         Microprocessor controlled PWM output

·         Separate Accel / Decel rate adjustment

·         Adjustable Current Limit

·         12t Motor overload protection

·          Adjustable Slip Compensation

·         Min / Max output frequency adjustment

·         Selectable Auto / Manual Reset

·         Chassis / IP20 models include motor filters to eliminate bearing and winding failures